Product Description
This sale is for a (15 oz. Net Wt.) aerosol can of T-Rex Adhesion Promoter for Rigid plastics, makes T-REX stick, SMR-1080 aerosol
Spray 1-2 coats of SMR-1080 directly on clean scuffed plastic, let dry for 15 minutes and topcoat.
Health and Safety:
See Material Safety Data Sheet and labels for additional safety information and handling instructions.
The contents of this package may have to be blended with other components before the product can be used. Before opening the packages, be sure you understand the warning messages on the labels and MSDS’s of all components, since
the mixture will have the hazards of all its parts.
Improper handling and use, for example, poor spray technique, inadequate engineering controls and or lack of Personal Protective Equipment (PPE), may result in hazardous conditions or injury.
Follow spray equipment manufacturer’s instructions to prevent personal injury or fire.
Provide adequate ventilation for health and fire hazard control.
Follow company, product MSDS and respirator manufacturer’s recommendations for selection and proper use of respiratory protection. Be sure employees are adequately trained on the safe use of respirators per company and regulatory
requirements.
Wear appropriate PPE such as eye and skin protection. In the event of injury, see first aid procedures on MSDS.
Always observe all applicable precautions and follow good safety and hygiene practices.
E9KZOYQ~~60_1__18951.1624631754.jpg?c=2 "Speedo Stick Aerosol")
